Step 1 - Auto Configure PioneerNet through Windows

1. Open your wireless network settings and select "PioneerNet". Click "Connect".
NOTE: This will not establish a successful connection, but will allow Windows to auto-configure the network type. Further configuration is necessary in Step 2 below before a successful connection can be established.

2. Select "Connect to a different network" after connection to PioneerNet fails. This will bring up the "Connect to a Network" window again.

Step 2 - Manually Configure through Windows

1. Right click "PioneerNet, and select "Properties" from the drop-down menu.

2. Navigate to the "Security" tab in the "PioneerNet Wireless Network Properties" window.
3. Select "Protected EAP (PEAP)" from the "Choose a network authentication method:" menu and click "Settings".

4. Select "Secured password (EAP-MSCHAP v2)" from the "Select Authentication Method:" menu and then click "Configure".

5. Uncheck "Automatically use my Windows logon name and password" from the "EAP MSCHAPv2 Properties window".

6. Click "OK" on all open Wireless Properties windows.
7. Open your wireless network settings and select "PioneerNet". Click "Connect".

8. Select "Enter/select additional log on information".

9. Enter your DU ID for the User name field, and your DU passcode for the Password field. Leave the "Logon domain" field blank. Click "OK".

10. Select "Enter/select additional log on information".

11. Click "OK" on the "Validate Server Certificate" window.

12. You are now successfully connected to PioneerNet. Save the network , and click "Close".